adf-07 series ac/dc power module 7w e-mail:sales@minmax.com.tw tel:886-6-2923150 2011/10/04 rev:15 page 1 of 3 features ? ultra-compact dimensions: 50.8x25.4x19.5 mm(2.0x1.0x.0.8?) ? fully encapsulated module with solder pins for pcb mounting ? universal input 85-264 vac, 47-440 hz ? eco design, compliant to energy star specification and erp directive 2009/125/ec ? protection class ll ? safety approval to cul/ul/iec/en 60950-1 ? over load and over voltage protection ? 3 years product warranty product overview the minmax adf-07 series is a new range of fully encapsulated ac/dc power supply modu les. they are designed for direct pcb moun ting with solder pins. the product features emi-filter to en55022, class b and ems compliance to the en 61000-4 standard. universal input voltag e 85-264vac and international safety approvals qualifies these power modules for applications in products with worldwide markets. the adf-07 series provide a cost effective solution for many spac e critical applications in commercial and industrial electroni c equipment. model selection guide input current output current 115vac, 60hz efficiency (typ.) output voltage max. @max. load max. capacitive load @max. load model number vdc ma ma(typ.) uf % adf-07s03 3.3 1400 96 2200 70 adf-07s05 5 1400 139 2200 73 adf-07s12 12 583 130 1000 78 adf-07s15 15 466 130 1000 78 adf-07s24 24 291 130 680 78 input specifications parameter model min. typ. max. unit input voltage range 85 --- 264 vac input frequency range 47 --- 440 hz input voltage range 120 --- 370 vdc no-load power consumption all models --- --- 0.3 w 115vac --- --- 10 a inrush current (cold start at 25 ) 230vac --- --- 20 a output specifications parameter conditions min. typ. max. unit output voltage accuracy --- 1.0 2.0 % line regulation vin=min. to max. --- 0.5 1.0 % load regulation iout=min. to max. --- 0.5 1.0 % 3.3 & 5.0vdc output models --- 1.5 1.8 %v pp of vo ripple & noise (20mhz) other output models --- 0.8 1.0 %v pp of vo minimum load --- 10 --- %inom. over voltage protec tion zener diode clamp --- 120 --- % of vo temperature coefficient --- 0.01 0.02 %/ overshoot --- --- 5 % vout foldback, auto-recovery current limitation (long term overload condition may cause damage) 105 --- --- %inom. short circuit protection hiccup mode, indefinite (automatic recovery)
adf-07 series ac/dc power module 7w e-mail:sales@minmax.com.tw tel:886-6-2923150 2011/10/04 rev:15 page 2 of 3 general specifications parameter conditions min. typ. max. unit i/o isolation voltage input to output, 60 seconds 3000 --- --- vacrms i/o isolation resistance 500 vdc 100 --- --- m ? switching frequency --- 100 --- khz hold-up time --- 20 --- ms mtbf (calculated) mil-hdbk-217f@25 , ground benign 330,000 --- --- hours emc emission conducted and radiated en 55011, class b, en 55022, class b, fcc part 15, class b standard specification requirement performance criteria en61000-4-2 air 8kv cont. 4kv b en61000-4-3 80~1000mhz, 10v/m 80% am, 1khz modulation a en61000-4-4 ac port 2kv dc, sl, tl 2kv not less than 1 min. b en61000-4-5 1.2/50us(8/20us) ac dif. 1kv dc 0.5kv b 0.15~80mhz, 10vrms (functional earth ports included) en61000-4-6 80% am, 1khz modulation b en61000-4-8 50hz/60hz, 30a/m a 30%, 10ms b emc immunity according en61000-6-1 en61000-4-11 60%, 100ms, 95%, 5000ms c protection class ii according iec/en 60536 safety approvals cul/ul 60950-1,iec/en 60950-1 input fuse all models external fuse (recommended) 1.5a slow ? blow type environmental specifications parameter conditions temperature r ange (operational) ambient -25 +70 power derating +50 to +70 0.263w / storage temperature range -40 +85 over temperature protection at 90 (automatic recovery at 67 ) cooling free-air convection humidity (non condensing) --- 95 % rel. h notes 1 all specifications typical at ta=+25 , resistive load, 115vac, 60hz input voltage and after warm -up time rated output curr ent unless otherwise noted. 2 ripple & noise measurement bandwidth is 0~20 mhz 3 these power modules require a minimum out put loading to maintain specified regulat ion, operation under no-load conditions wil l not damage the power supplies however they may not meet all listed specifications. 4 all ac/dc modules should be externally fused at the front end for protection. 5 other input and output voltage may be av ailable, please contact factory. 6 specifications subject to change without notice
adf-07 series ac/dc power module 7w minmax technology co., ltd. 18, sin sin road, an-ping industr ial district, tainan 702, taiwan tel: 886-6-2923150 fax: 886-6-2923149 e-mail: sales@minmax.com.tw 2011/10/04 rev:15 page 3 of 3 7 package specifications mechanical dimensions pin connections pin function 1 ac(n) ? ac neutral 2 ac(l) ? ac line 3 +vout 4 -vout ? all dimensions in mm (inches) ? tolerance: 0.5 (0.02) ? pin diameter ? 1.0 0.1 (0.040.004) physical characteristics case size : 50.8x25.4x19.5mm (2.00x1.00x0.77 inches) case material : plastic resin + fibergl ass (flammability to ul 94v-0 rated) weight : 44g [0.40] 43 10.16 1 2 45.72 [1.80] 50.8 [2.00] 20.32 [0.80] 25.4 [1.00] 1.00 [ 0.04] 5.0 [0.20] 19.5 [0.77] 0.7 [0.03] 6.0 [0.24] bottom view
|
